How Many Amps Does A Refrigerator Use? Amazing Guide 2022

So now we need to understand what amps a refrigerator uses. This article provides all the information on how many amps does a refrigerator use. It is the most basic and important appliance in our kitchen. If you are planning to get a new refrigerator, then there are some important things that you need to consider while selecting the fridge or if you need to upgrade your old model to a new one then also you need to take notice of a few important things.

What Are Refrigerator Amps?

What Are Refrigerator Amps

Refrigerator amps are a measurement of the power consumed by your refrigerator. The more refrigeration amps your refrigerator uses, the more energy it will use. The more energy it uses, the higher your electricity bill will be.

Refrigerator amps measure how much current flows through your fridge compressor when it’s running. This is part of the reason that running a gas refrigerator can cost less than an electric one: Gas-powered fridges don’t need compressors, so you’re paying less to run them.

The Difference Between Amperage, Wattage, And Voltage

The difference between amperage, wattage, and voltage is a common question asked by homeowners in the electrical contracting industry. The answer to this question can be confusing because each term is represented by a different unit of measure. Amperage is measured in amps, wattage is measured in watts, and voltage is measured in volts.

Amperage (A)

Amperage is the amount of current that flows through an electrical circuit. The higher the amperage flow, the greater the amount of power that can be used by an appliance or device. For example, if you have two lights with identical wattages but one light has a higher amperage rating than the other, it will use more electricity to operate because it has more current flowing through its circuit.

Wattage (W)

Wattage refers to how much power an appliance or device uses when operating at full capacity or when working under load conditions. It’s important to note that wattage doesn’t always correlate directly with amperage draw because some appliances don’t require much current to operate while others need more current than normal operation requires.

Voltage (V)

Voltage measures how much pressure is pushing electrons through a circuit. The higher the voltage, the faster electrons can move through a circuit. This allows more electricity to be delivered at one time and increases the power output of your device.

How Many Amps Does A Fridge Use?

Refrigerators use about 3.2 amps. This is a small amount of current, so it’s not unusual for large appliances like refrigerators to share an outlet with other devices.

Refrigerators draw more power when they’re first plugged in and cooling down than they do once they reach their operating temperature. When the door is opened and the interior light is turned on, it draws even more power. The chart below shows how much current your refrigerator will draw at different times:

If your refrigerator has two or more compartments, each compartment draws its own current. So if you have two small refrigerators (1 cubic foot or less), each will draw about 600 milliamperes (mA). If you have two full-size refrigerators (2 cubic feet or more), each will draw about 1,200 mA.

How Many Amps Is A Typical Refrigerator?

how many amps is a typical refrigerator

The most common household appliances draw anywhere from one to three amps, but a fridge is on the upper end of that range. Refrigerators typically draw between three and five amps or 3,300 to 5,400 watts per hour (Wh).

That means if you have an older refrigerator that’s inefficient, it could be costing you hundreds of dollars each year in electricity costs. The newer refrigerators use around 300 watts or less per hour, which is significantly less energy than older models use.

Many models can be plugged into a power strip with a built-in ammeter that shows how much power the appliance uses. If you don’t have one of these handy, you can use a Kill A Watt meter to measure power consumption directly.

How Many Amps Does A Refrigerator Use On Start-up?

Refrigerators draw a large amount of current when they are first turned on and this is something that can cause problems if you don’t have an adequate circuit. The compressor and other parts of the refrigerator need to be cooled down before the refrigerator will start working properly, so it draws a high amount of current for a short period of time. This can cause power surges that can damage sensitive electronics such as computers and televisions.

The amount of current used by your refrigerator depends on how much time it takes for the refrigerator to cool down. If it takes less than 20 seconds for your refrigerator’s compressor to cool down, it will only draw between 1 and 2 amps of current. If it takes longer than 20 seconds for the compressor to cool down then it will draw between 2 and 3 amps of current until everything is running smoothly enough for normal use.

How To Save Energy

Energy is an essential element of life. It is the energy that powers our homes, businesses, and vehicles. It is also the energy that we use to power our electronics and appliances. We are constantly surrounded by energy, but how much do you actually know about it?

Here are some tips on how to save energy in your home:

Purchase The Right Appliance

When purchasing appliances such as refrigerators or televisions, look for ones that have earned the Energy Star label. This ensures that they use less electricity than those without this label.

Choose Energy Star Rated Devices

The EPA’s Energy Star program promotes energy efficiency across America. It works with manufacturers to create products that meet high standards for performance and safety while using less energy than standard models. The result is a product that saves you money on your electric bill and helps protect the environment by reducing greenhouse gas emissions.

Keep Settings Optimal

Even if you’re not home, there are still things you can do to keep energy use down. If possible, set your thermostat at 78 degrees Fahrenheit (or lower in winter) when you’re away from home for more than two hours. Also, turn off lights when leaving rooms and unplug any unnecessary electronics around the house or office when not in use. You can also consider installing motion sensors on lights or programmable thermostats so your home doesn’t continue heating or cooling when it isn’t necessary or used often enough to justify it.

Power Down And Unplug Unnecessary Electronics

You can save a lot of energy by simply unplugging all your electronics when they are not in use. This will help you save electricity on things like televisions, DVD players, stereos, and other devices that use up a lot of power even when they are switched off.

Use Passive Lighting And Cooling

Passive lighting, such as LED lights and CFL bulbs, uses less energy than incandescent bulbs because they don’t have any heating element inside them like fluorescent or incandescent bulbs do. They also last longer than both these types of bulbs so you won’t need to replace them as often as you would with an old-fashioned light bulb.

Install Solar Energy Converters

If you have solar panels installed on your house then you can take advantage of free energy by using them at night when there is no sunlight available for the solar panels to convert into electricity for your home appliances or gadgets.


Do Refrigerators Need A Dedicated Circuit?

The answer is yes, refrigerators do need a dedicated circuit. This can be especially true if your refrigerator is powered by a compressor, which uses a lot of energy.

If you have an older home or apartment building, you may be using a shared circuit for all the major appliances in your home. In this case, your refrigerator will share its power source with other appliances such as the stove and dishwasher. This can lead to problems if one of those other appliances suddenly demands more power than usual. For example, if you turn on both your stove and microwave at the same time, it could cause a short circuit that temporarily shuts off power to your refrigerator.

Is It Okay To Run A Fridge Off An Extension Cord?

Is it okay to run a refrigerator off an extension cord? The short answer is yes. The longer answer is, that it depends on the size of the cord and how long you run the extension cord.

The first question we have to ask ourselves is why is this even a question? If you’ve ever lived in an apartment or rented a house and needed to run an extension cord from one outlet to another, you know what I’m talking about. This can become a real problem when you need to connect multiple appliances together into one outlet.

The reason why this happens is that most homes have only two outlets in each room, sometimes less depending on where your kitchen and living room are located. In order for us humans to move around freely without tripping over cords all over the place, we need more than two outlets in each room. This can lead to using extension cords nearly everywhere in our homes if we don’t plan ahead or know better ways to work around these limitations (more on that later).

Can I Put A Freezer And Refrigerator On The Same Circuit?

Yes, it is possible to put a freezer and refrigerator on the same circuit. However, if you have an older home with a knob and tube wiring, you should have your electrical panel upgraded before adding any additional appliances to the circuit.

If you already have breaker boxes or fuses in your home, there is no need to upgrade them. The best way to determine how many circuits are available for use is to call an electrician and ask for an electrical inspection. The inspector will be able to tell you what breakers or fuses are available for use and which ones are not functioning properly.

In addition, if there are any safety issues with your electrical system that need addressing, such as loose wires or broken sockets, this will be evident during the inspection as well.


Any electric appliance that uses a motor or compressor to run is on the list of things that cause a higher energy bill. In the case of refrigerators, not only do they use a lot of electricity but also some types of refrigerants can be powerful greenhouse gases. Look online for information about various models because some are better in this regard than others. We hope the information in the article about how many amps does a fridge use is helpful to you! Thank you for your time and attention.

Staff Writer At Saved By The Max

Joseph Monley is a person who loves to learn about cuisines from all over the world. She graduated from Columbia University and has been to many countries in Europe, Southeast Asia to experience different cultures.

Leave a Comment