12 Causes Why Whirlpool Refrigerator Not Cooling

Whirlpool is one of the most widely used home appliances brands and their refrigerator is also used by many people. However, even as a big brand, its products cannot escape being defective. Here, we will tell you more about the Whirlpool refrigerator not cooling.

Why is My Whirlpool Fridge Not Cooling?

If your Whirlpool fridge isn’t cooling, the problem could be anything from a dirty condenser coil to a faulty thermostat. The first thing you should do is check that the temperature control is set properly. If it’s too low, it won’t cool enough, and if it’s too high, it will freeze everything inside.

Dirty Condenser Coils

Condenser

If your Whirlpool fridge isn’t cooling and the temperature control is set correctly, the next thing to check is the condenser coils that are located on the back of your appliance.

These coils need to be cleaned regularly so they can remove heat from inside your appliance and transfer it outside. If they’re covered in dust or dirt, then they won’t work properly.

You can clean these yourself by using a vacuum cleaner with an attachment designed for cleaning car engines (this has an end with metal bristles), or else you can take apart the defrosting system and wash them manually using hot water and soap.

Door Seal Is Loose

The door seal is the rubber gasket that fits between the door and the frame of your refrigerator. If this is not properly sealed, air can get in and warm up, causing your freezer to lose its cold temperature.

The Temperature Isn’t Set Properly.

The Temperature Isn't Set Properly

If your refrigerator is not set to the right temperature, it may cause the cooling fan to run constantly. This will cause the compressor to fail prematurely.

To fix this problem, turn off the power to your refrigerator and unplug it. Then locate the temperature control knob on the front of the unit. Turn it to its coldest setting and wait 15 minutes. Once that time has passed, plug the unit back in and turn it on again.

If you still have problems with your fridge not cooling properly, try adjusting the temperature again until you find an ideal setting for your needs.

Read more: What temperature should a refrigerator be?

Power Failure

If your power goes out unexpectedly or if there has been a storm, appliances can sometimes get hot enough inside that they shut down automatically. You’ll know this is happening if all of your appliances stop working at once or if your lights flicker when you flip the switch on and off.

In order to reset them, unplug everything from their power sources and wait at least 15 minutes before plugging them back in again. Then try turning them on one by one until they all work again.

Part Failure

If your refrigerator is not cooling, it may be because of a defective part. The compressor, relay, and fan motor are most often the parts that fail.

Overflowing Refrigerator

If the water line is connected to an overflowing pan, it will flood into your refrigerator and ruin all of your food. This can be fixed by unplugging the refrigerator and cleaning out the pan so water doesn’t continue to flow into it.

The Level Of The Refrigerator Isn’t Right

If the level of your fridge isn’t right, it could cause it to overheat or freeze up inside. To fix this problem, simply adjust the legs on the bottom of the unit until there is adequate clearance between them and the flooring surface.

Condenser Fan Motor Is Broken

Condenser Fan Motor Is Broken

The condenser fan motor is what moves air through the condenser coils and out of the back panel of your refrigerator. If the fan isn’t working properly, it can cause your refrigerator to overheat and stop cooling. A faulty condenser fan motor will often make a clicking or buzzing sound when turned on.

Thermistor Malfunctioning

A thermistor is an electronic component that measures temperature and relays this information to the thermostat so it knows how much heat needs to be removed from inside the box. If your fridge is running but not cooling at all, this could be an issue with the thermistor.

The part can often be replaced easily at home, but in some cases, you may need professional assistance from an appliance repair technician.

The Thermostat For Temperature Control Is Not Working Properly

The thermostat controls when the compressor comes on and off in the fridge. If this is broken, then it could cause your refrigerator to not cool properly. The thermostat can be replaced easily, but make sure to turn off the power to the fridge before doing so!

Start Relay

The start relay is responsible for sending power directly to your compressor. If it fails, it will not be able to start up when you open and close the door. This can happen if there is something blocking the path between the start relay and the compressor, or if there is a problem with the wiring leading to the start relay.

The Compressor Is Broken

If none of these things seem to be causing your refrigerator’s problems, then there might be something wrong with your compressor itself. A broken compressor will lead to all kinds of issues, such as high utility bills, condensation on interior walls, and strange noises coming from inside your refrigerator compartment.

How to Troubleshooting

A Whirlpool refrigerator not cooling, freezing, or making ice is a common problem. The first thing to check is the thermostat setting. Set it at the recommended temperature. If you have set it at the right temperature, but the appliance still doesn’t work, you may need to replace the thermostat or defrost timer.

If your refrigerator doesn’t seem to be cooling down as fast as normal, you might have a problem with your condenser coils. These are located behind the front grill on top of your refrigerator, and they help cool air in your freezer and refrigerator sections. If they’re clogged with dirt, dust, or other debris, these coils will not be able to do their job properly and may even break down entirely if not cleaned properly.

Read more: How to clean refrigerator

Whirlpool Fridge Not Cooling Enough

Is my Whirlpool refrigerator not cooling enough? It could be for a number of reasons. Here are some things you can do to fix the problem. Make sure the doors are closed. You might have left them open while getting something out of the fridge. It can lead to overheating and make your fridge work harder than it should have.

Check the condenser coils for any blockages or obstructions. If there’s anything that could be blocking airflow, remove it immediately. Check if there is any food buildup on your condenser coils. If so, clean them off with a vacuum cleaner and then wipe them down with a damp cloth so that nothing gets stuck on them again in the future. Check if your thermostat is set correctly and make changes if needed—this will help you save on energy costs.

Whirlpool Refrigerator Not Cooling After Power Outage

If your Whirlpool refrigerator is not cooling, it could be due to a power outage or a problem with the compressor.

In most cases, if your Whirlpool refrigerator is not cooling, it is because of a power outage. The power outage can cause the refrigerator to shut off and lose its cool temperature. In this case, you will need to wait until the electricity comes back on before you can use the appliance again.

If the power outage was just temporary and only lasted for a few minutes, then no damage should have been done to your refrigerator. However, if you find that your Whirlpool fridge has been unplugged from an electrical socket for several hours or more, then there may be problems with its internal components.

If you are experiencing problems with your Whirlpool refrigerator’s cooling system after a power outage, then there may be something wrong with your compressor or other electrical components inside of your appliance.

Check out our guide about: How does a refrigerator work

Whirlpool Refrigerator Not Cooling And Making Clicking Sound

Many times, a Whirlpool refrigerator not cooling is the result of a failed compressor. The compressor is the part of the refrigerator that changes the refrigerant gas into a liquid and expels it into the evaporator coils. The evaporator coils are located in the back and top of your refrigerator. These coils are responsible for cooling down your food and drinks.

A refrigerator that has stopped working should be repaired as soon as possible because you will end up throwing out perishable food if you don’t fix it soon enough. If you want to save on repair costs, then you should check out how to fix a Whirlpool refrigerator yourself instead of calling a technician right away.

FAQs

Why Is My Whirlpool Fridge Not Cooling But The Freezer Works?

A Whirlpool refrigerator not cooling is probably the most common problem that you will face with this brand. The cooling unit inside the refrigerator is a very complex system, which requires specific checks and procedures to troubleshoot it properly. You need specialized tools and equipment to diagnose and repair problems with refrigerators.

If your Whirlpool refrigerator is not cooling properly, then you should perform these basic checks before calling for service:

  • Check if the temperature in the freezer compartment is set correctly. If it’s too high, then the compressor may run continuously, causing it to overheat and shut down prematurely.
  • Check if there are any obstructions inside the freezer compartment or around the door seal. This can cause improper air circulation inside your refrigerator and reduce its capacity to maintain a consistent temperature level.
  • Make sure there are no food spills inside your freezer compartment that could prevent proper air circulation or block some of its vents.

Is There A Reset Button On A Whirlpool Refrigerator?

Yes, there is a reset button on a Whirlpool refrigerator. It is located on the back of the unit and it looks like a small button with a red dot on it. This reset button will allow you to reset all of your temperatures for your refrigerator and freezer.

The next time that you have a power outage or any other problem getting your refrigerator to run properly, try pushing this reset button first before calling in a repairman. If you are still having problems after pushing this reset button, then call in a repairman to fix your unit.

Will Unplugging a Fridge Reset It?

The short answer is no. Unplugging your refrigerator will not reset it. That being said, there is a chance that if you unplugged your fridge and plugged it back in without letting it sit for a couple of minutes, it could start working again.

The reason why this doesn’t work is that the power surge from plugging in the cord causes the compressor to overheat and burn up. The compressor is what makes your refrigerator run, so without it, there’s nothing to cool your food.

There are two ways to fix this problem: either replace the compressor (which can be expensive) or install a new inverter board (cheaper).

Bottom Line

As you have seen, there are many reasons why your Whirlpool refrigerator may not be cooling. Ensure that your refrigerator is level to provide the most consistent airflow to the cooling coils. Our hope is that this article has demystified the repair process for the problem of a Whirlpool refrigerator not cooling and has given you the confidence to tackle this do-it-yourself repair.

Staff Writer At Saved By The Max

She is the one who has been with Saved By The Max since its inception. In the first days of coming here, she worked as a waitress, then through the process of working and learning more specialized knowledge, she is now an events manager.

Leave a Comment